Thinkpad X30でpcmciautils

なんかうまく動かなかったのだけど、/etc/pcmcia/config.optsをwindowsで起動した時のものに合わせて書いてみたら動いたので一応メモしておきます。

#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards.  Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards.  Those are set by
# the PCI hotplug subsystem.
#

#include port 0x100-0x3af
#include port 0x3e0-0x4ff
#include port 0x820-0x8ff
#include port 0xc00-0xcf7
include port 0xff00-0xffff
include port 0xfe00-0xfeff
include port 0xfd00-0xfdff
include port 0xfc00-0xfcff

include memory 0x50000000-0x50000fff
include memory 0xfebfe000-0xfebfefff
include memory 0x000db000-0x000dbfff
include memory 0x50100000-0x50100fff
include memory 0xfebfd000-0xfebfdfff
include memory 0xfe600000-0xfe7fffff
include memory 0x000da000-0x000dafff

#include memory 0xc0000-0xfffff
#include memory 0xa0000000-0xa0ffffff
#include memory 0x60000000-0x60ffffff


# These may hurt on FSC.
# include port 0x3c0-0x3d2
# Exclude 0x3d3 as Radeon IGP MCE's if you touch these ports
# include port 0x3d4-0x3df

# High port numbers do not always work...
# include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
#include port 0xa00-0xaff